Japanese Meiji period cylindrical pawlonia (kiri) wood domaru (tree-trunk) hibachi with a relief design of flowering grasses in gold maki-e lacquer and shell inlay. A gold lacquered bird flies on the back. Original copper liner. Late 19th to early 20th century. 8” high x 11 1/2" wide. Very good overall condition with only minor losses to the shell inlay.

An antique Japanese Haribako (sewing box) made of Tochinoki (Horse Chestnut) and Kiri (Paulownia) woods. Rare connected double Pine needle bronze handles representing good luck and longevity with Gumbai shaped hinges on the top. Vertical slot on the right upper back that was originally used to store a textile ruler called Shaku...

Antique Japanese Tobako-bon (tobacco box) with two small drawers. The top portion has an open square compartment lined with copper, a small rectangular-shaped space and another square compartment closed with a wooden lid. Just above the drawers is a long diagonal space to hold pipes. The box has a bamboo handle for carrying. Made with hardwood burl with dramatic swirling figure...

An antique Japanese hand carved wood Ranma (transom) framed in Hinoki (Cypress) and hand carved in deep relief of Akita Sugi (Northern Cryptomeria) woods. Featuring a complex multi level temple and grounds amidst a a beautiful pine tree forest with mountains and clouds in the foreground and background. Continuous elaborate design on the reverse side of the transom.

Age: Meiji/Taisho Era (1910-1920)

Dimensions: 72" Wide by 15 3/4" High by 2 1/2" Deep

An antique Japanese Ranma (transom) made of Akita Sugi (northern Japan Cryptomeria) and Hinoki (Cypress) woods. The frame was finished in a black Urushi lacquer while the design was hand carved in relief on both sides. It depicts a scene of a male and female flying crane (each symbolizing 1,000 years of long life and together symbolizing a harmonious partnership) gliding through a forest of gnarly pine trees (symbolizing longevity)...

An antique Japanese Ranma (transom) that was highly detailed and hand carved out of Akita Suginoki (Cryptomeria from the Akita region) with a Hinoki (Cypress) frame. It features a landscaped Shinto shrine grounds complete with the shrine complex, pine trees, clouds, a Torii gate, a Pagoda, and a beautiful footbridge. The image is carved on both sides to show the front and back of the complex...

A Japanese ranma (transom) with a Hinoki (Cypress) frame and an Akita Sugi (Akita Cryptomeria) wood hand carved bamboo and plum blossom theme in a highly detailed three dimensional relief. Most likely mounted in a wealthy Japanese home or a fancy Ryokan (country inn). Its main theme is a majestic Plum Blossom tree (known as Bai) accented with Bamboo (Chiku). The ranma was often mounted above the Fusuma sliding doors between rooms to allow the air to circulate freely...

Pair Japanese Cedar Wood Miso Merchant's Storage Tubs, or Barrels, Ca. 1940, 14 1/2" high include cover, 14" diameter top rim, heavy twisted Bamboo ropes wrapped around, lacquered chestnut color outside, Kanji writings for date and shop name on bottom for both barrels, inside is unfinished and shows beautiful aged old wood grains. The condition is good, no damages.

A low Japanese Negoro incense table with many layers of black, red, and translucent lacquer pigment. Naturally worn finish consistent with age an use. European style hand carved leg and foot. Original hardware of hand forged iron. Traditionally used as a low stand to raise up an incensor.

Edo Period 18th Century

13 1/2" long X 11" wide X 6 3/4" high

Japanese Two(2) pieces U shape heavy Black Wrought Iron Side Locks, 9" high, 3 1/2" wide(maximum outer measurement, 8 3/4" high, 3" wide, (inner measurement), 1/2" thick, Pin(2 1/2" deep), this set looks like two(2) divided area to put through heavy wood Rod for both sides and carry on two(2) men's shoulder, one in front and one in the back, with original attached heavy duty Iron nails or pins.

Three(3) pieces Japanese heavy weight Black Wrought Iron U Shape side Locks and Handles, side handles for 2 pieces Tansu(chest on chest), Tansu side handles for top piece, and use as a lock to the top piece from lower piece together as one(1) Tansu, 6" high, 3 5/8" wide=maximum outer measurement), 5 3/8" high, 2 5/8" wide=inner measurement).

Seven(7) pieces heavy weight Black Wrought Iron and Brass Japanese Tansu or Furniture Hardware, 2 handles with original nail(larger=3 3/8" wide inner measurement, 3 3/4" wide=outer, 1 3/4" high), (smaller=2 5/8" wide=outer measurement, 2 3/8" inner),1 1/4" high), corner(2" x 2" wide), round ring(1 3/4" diameter), small roung ring with flower shape back plate(ring=1 1/8" diameter, nail=1 1/2" deep), roung small nail(nail head=1/2" diameter, 1 1/2" deep), long brass piece(5 3/4" long, 1/2" wide).

Two(2) Japanese Black Wrought Iron heavy weight solid Tansu Chest Hardware or Drawer Handles, 2 different sizes, Larger handle with carved pierced Back plate(7" wide, 1 1/8" high=outer measurement, and original nail and hole(4 1/4" wide). Smaller handle only without back plate(5" wide outer maximum measurement, 3" wide(inner top measurement), 1 5/8" high maximum height.

An antique Japanese Yosegi Kobako (marquetry personal drawer box) from the Hakone region made of various natural colored woods with a Hinoki (Cypress) structure and drawer backs. The expert craftsmanship is quite evident by how the front marquetry design flows seamlessly across all of the drawers while the horizontal and vertical marquetry of the top and sides adds texture and dimension to the piece.

Yosegi is a centuries old traditional Japanese craft that began in the late Edo era...

An antique Japanese Chobako (merchant box) made of thick Hinoki (Cypress) and thick Suginoki (Cryptomeria) woods. Straight dovetail joinery with hardened wooden nail construction. Original bronze and iron hardware. Two different sized coin slots at the top of the box. Includes a working key.

Age: Meiji Period (1868-1912) Dimensions: 10 7/8" Side x 12" High x 11 7/8" Deep

An antique Japanese Haribako (traditional tall neck sewing box) made of Kuwa (Mulberry), Kuri (Chestnut), and Kiri (Paulownia) woods. All original finish and hand made bronze hardware. The two upper drawers and the small drawer on the upper neck all have wooden sliding covers to protect the contents within. The hinged cover on the upper neck opens to a small recess where a pin cushion was kept. The center of the neck has a hole where originally a ruler called Shaku used to be held...

An antique Japanese Chobako (merchant storage box) made of Kurinoki (Chestnut) and Suginoki (Cryptomeria) woods. All original hand made iron fittings including the Hirute drawer handles and the Warabite carrying handle. It features unique Cherry blossom escutcheons behind the drawer handles and a coin slot at the top that drops into the top left drawer. The other 5 drawers were used to safely keep small store valuables...

Candle stand made of wood and bamboo. The wick and the saucer are made of copper. In excellent condition except for a hairline in the bamboo, but no problem for use. The first half of the 20th century. H:39cm Diameter of the bottom:18cm